SIO/STS Mocness Packing list

Components provided by STS:

1EA NET Interface Unit (6800Meter depth rated housing)

1EA Net Angle Sensor (6800Meter depth rated housing)

6EA MCIL-2-FS-MCDLS-F to IE2M-7/16 Cable Assemblies 48" Long 
Consists of:
	2EA Flowmeter cables
	2EA Motor cables
	2EA Response cables

2EA MCIL-6-FS-MCDLS-F to MCIL-6-FS-MCDLS-F Cable Assemblies 48" Long
Consists of:
	1EA Seabird CTD to Mocness Interface Cable (Same pinouts as a standard Carousel Cable)
        1EA Net Angle Sensor Cable

6EA MCDC2F 2-pin dummy plug w/locking sleeve
1EA MCDC6F 6-pin dummy plug w/locking sleeve


_____________________________________________________________

Components provided by user:

1EA Mocness Frame with nets, Motor, Flowmeter and Response switch 

1EA SBE9Plus CTD (without cage)
1 or 2EA SBE3S Temperature Sensor w/cable(s)
1 or 2ES SBE4C Conductivity sensor w/cable(s)
Optional sensors:
1EA Transmissometer w/Cable
1EA Fluoromter w/cable
1EA Oxygen Sensor w/cable

1EA Sea Cable termination kit and hardware.

The above sensor cables are the standard ones that would normally be used on a standard CTD/rosette using a SBE9+ CTD system.
Do not use any cables that are supplied with the original mocness system.

1EA SBE11 Deck unit with RS232 hookup cables
    (The system should be hooked up via RS232. The GPIB feature has not yet been fully tested)

1EA Windows 7/8/10 Computer or Laptop (i7 processor preferred)
     PC/Laptop needs to have 3 or more serial ports 
1EA PC Monitor ( Widescreen >19" preferred)
     Monitor needs to have a screen resolution > 1600x1200. 1920x1080 Preferred.

All above sensors are mounted on the frame in their usual positions.
The original mocness bottle, battery pack bottle and all cabling are removed.
The SBE9Plus CTD is mounted in the same position as the original Mocness bottle
The STS Interface unit is mounted in the same position as the original Mocness battery pack